Table of the System’s Programming Codes
Configuring the System Specifically for the Client For internal distribution only
A31003-K1250-S100-12-7619
7-2 HiPath 1100, Service Manual
Numbering Plan
Programming Tables
For information on the programming of each feature see “Comments about the System’s
Programming Codes” on page 7-21
Table 7-2 Numbering Plan
Description HiPath 1120 HiPath 1130 HiPath 1150 HiPath 1190
External Line 801 to 806 801 to 817 801 to 817 801 to 845
Extension, including S
0
11 to 30 11 to 60
610 to 621
11 to 60
610 to 645
101 to 240
Group of external lines 0 or 890 to 899
Call Group (CG) 770 to 779
Hunt Group (HG) 780 to 789
UCD Subscriber Group 790 to 799
MSN-CAPI Line 10 10 10 100
Table 7-3 Classification of programming tables
Ta b l e E x p l a n a t i o n
1. Important settings page 6-3
2. External line settings page 6-4
3. Programming an Extension page 6-6
4. DISA page 6-10
5. General settings page 6-11
6. Updating the Software page 6-13
7. Remote Administration page 6-13
8. Entrance Telephone page 6-14
9. Call Detail Recording page 6-14
10. Fax/DID Module page 6-17
11. Digital trunk settings page 6-18
12. ADSL Module page 6-20
13. Relay and sensor on the HiPath 1120 page 6-20
To Next Page
Loading...
