Siemens HiPath 1100 Series - Table 7-9 General Settings

Table of the System’s Programming Codes
Configuring the System Specifically for the Client For internal distribution only
A31003-K1250-S100-12-7619
7-12 HiPath 1100, Service Manual
**〉 For more details on how to set timers refer to the Help file of the HiPath 1100 Manager administrative software. See the
sections on timers specifically.
Multiple for Call
Charge Factor
042 1 - Factor 1
2 - Factor 2
Pulse multiplier: 000 to 254 Automatic 001 - Value 1
Call Charge Factor
for extensions
043 Extension 1 - None
2 - Factor 1
3 - Factor 2
# instead of
extension
1 - None
Call Charge Value by
Extension
97 Extension Value: 00000 to 99999
+
Comma position: 0 to 4
Automatic factor - 00001
slot - 0
Call Cost Limit by
Extension
044 Extension
∗ - To enable
# - To disable
Automatic # - To disable
Date for Updating
the Call Cost Limit
for an Extension
045 dd (day, from 01 to 31) or
∗ - To disable
Automatic
∗ - To disable
Setting a System
Password
80 New password (5 digits) Confirm new
password
Password -
31994
Night Service Pass-
word
49 00000 to 99999 Automatic Password -
31994
Restoring Default
Settings
99 System password (default: 31994) Automatic
Regular Timers 39 **01 to 35: Timer code New setting: 0 to 65535 #
Factory
default
System Timers 40 **1 to 34: Table entry New setting: 0 to 255 #
Emergency
Numbers
040 Slot: 1 to 5 Number (up to 10 digits) 5-second time-
out
Brazil -190 and
193
Portugal and
Spain - 112
Module Detection 061 00 - Detect all modules or
01 to 20
# instead of
slot
00
Type of MSN Signal 073 Slot: 001 to 140 Type of signal: 1 to 4 Automatic 1
Reference Clock 090 slot or
00 + * - Erases (switches to Auto
mode)
Physical Interface: 1 to 5 Automatic Automatic
Mode
Assigning a Tempo-
rary MSN
093 Input data type:
1 - MSN Number
2 - MSN Number slot
Automatic None
Table 7-9 General settings
Programmed
Functions
Cod
e
Intermediate Data Data to be
Programmed
Completing
Data Entry
Default