Siemens HiPath 4000 - Page 144

Step by Step
Individual phone configuration
144
Discoverability
Set whether your OpenStage should be discoverable
for other Bluetooth devices.
For more information, see Æ page 152.
Prerequisite: The "Bluetooth settings" page opens
Æ page 143.
Select the "Discoverable" entry.
The phone displays the current setting.
Confirm the option shown.
Confirm the option shown in the context menu.
Bluetooth name
Here you can determine which name your OpenStage
should use to register at other Bluetooth devices.
Prerequisite: The "Bluetooth settings" page opens
Æ page 143.
Select the "Phone name" entry.
The phone displays the current setting.
Confirm the option shown.
if nec.
h Delete preconfigured setting.
j Specify and confirm the required name.
Linking
Select how the linking should be implemented here.
For more information, see Æ page 152.
Prerequisite: The "Bluetooth settings" page opens
Æ page 143.
Select the "Pairing mode" entry.
The phone displays the current setting.
Confirm the option shown.
Select and confirm the option shown in the context
menu,
or
Select and confirm the option shown,
No g
Yes
By factory default, the Bluetooth name is: Open-
Stage [MAC address of your telephone].
OpenStage (08:0...
No g
No
Prompt