Programming sensor keys
87
Step by Step
Configuring DSS keys
Direct station selection keys can be assigned an internal
number from the HiPath 4000 network.
A typical application of direct station selection keys is
the executive-secretary configuration Æ page 127.
You must first program a sensor key with the "Direct sta-
tion select" function.
Then you must define the phone number and label.
Programming a sensor key as a DSS key
v Open the Program/Service menu Æ page 37.
Select and confirm the option shown.
S Press the required sensor key.
Confirm the option shown.
Select and confirm the option shown.
Confirm the option shown.
The sensor key is now defined as a DSS key.
Confirm the option shown.
Confirm the option shown.
Select and confirm the option shown.
S Press the saved DSS key.
Defining the phone number
j Enter the station number.
Confirm the option shown. Your entry is saved.
Your telephone can be configured so that direct
station selection keys cannot be set up, thus fa-
cilitating data and personal security. Contact your
service personnel should you have questions.
Key function?
Change?
Direct Station Select?
Save?
DSS
Service Menu
Destinations? g
Direct Station Select?
Completed?
To Next Page
Loading...
