Siemens HiPath 500 - Forwarding Calls on Trunks

Making calls in the team/executive/secretary configuration
109
Step by Step
Forwarding calls on trunks
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
N Open the Program/Service menu Æ page 28.
Select and confirm the option shown.
or
S If available, press the "CFW MULAP" key.
(You have programmed a key with the incomplete "CFW
MULAP" function, excluding the call forwarding type
and destination Æ page 72.)
S Press the required trunk key.
or
j Enter the required trunk number.
Select and confirm the option shown,
or
select and confirm the option shown,
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
or
S If available, press the "CFW MULAP" key. (You have
stored the call forwarding type and destination on the
"CFW MULAP" key, Æ page 72.)
Forward Line: On
1=all calls
2=external calls only
3=internal calls only
Save