Siemens HiPath 500 - Activating Tone Dialing;Dtmf Suffix-Dialing

Enhanced phone functions
65
Step by Step
Leaving a conference
Confirm.
Select and confirm the option shown.
or
\ Replace the handset, if this feature is configured (con-
tact your service personnel).
Ending a conference
Confirm.
Select and confirm the option shown.
or
\ Replace the handset, if this feature is configured (con-
tact your service personnel).
Removing the ISDN central office party from the
conference
Confirm.
Select and confirm the option shown.
Activating tone dialing/DTMF suffix-dialing
You can transmit dual-tone multifrequency (DTMF) sig-
nals to control devices such as an answering machine
or automatic information system.
N Open the Program/Service menu Æ page 28.
Select and confirm the option shown.
Select and confirm the option shown
[1]
.
j You can use the keys 0 through 9, ) and
(
to transmit DTMF signals.
Conference g
Leave conference
Conference g
End conference
Conference g
Drop last conf. party
Calls g
DTMF dialing
[1] "Differing display view in a HiPath 4000 environment (not for
HiPath 500)“
Æ page 127