Siemens HiPath 500 - Using Speed-Dial Keys and Numbers

Enhanced phone functions
55
Step by Step
Making calls using system speed-dial
numbers
Prerequisite: You know the system speed-dial num-
bers (consult your service personnel).
N Open the Program/Service menu Æ page 28.
Select and confirm the option shown
[1]
.
j Enter a three-digit speed-dial number.
if nec. Suffix-dialing
j If necessary, you can suffix-dial additional digits
(for example, the user’s extension) at the end of the
saved station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
Dialing with speed-dial keys
Prerequisite: You have configured speed-dial keys
Æ page 55.
N Open the Program/Service menu Æ page 28.
Select and confirm the option shown
[1]
.
) Press the key shown.
j Press the required speed-dial key.
Configure a speed-dial key
You can program the keys
0 to 9 with
ten frequently used phone numbers.
N Open the Program/Service menu Æ page 28.
Confirm.
Select and confirm the option shown
[1]
.
) Press the key shown.
Use speed dialing
[1] "Differing display view in a HiPath 4000 environment (not for
HiPath 500)“
Æ page 127
Use speed dialing
Destinations g
Change Speed Dial