Siemens HiPath 500 - Individual Phone Configuration; Adjusting Display Settings; Adjusting the Display to a Comfortable Reading Angle; Illuminated Display

Individual phone configuration
123
Step by Step
Individual phone configuration
Adjusting display settings
Adjusting the display to a comfortable
reading angle
You can swivel the display unit. Adjust the display unit
so that you can clearly read the screen.
Illuminated display
During operation, e. g. when entering a number, the
display automatically lights up. The display lighting
switches off automatically a few seconds after finishing
the last action.
Setting contrast
The display has four contrast levels that you can set ac-
cording to your light conditions.
+ or - Press one of the keys shown in idle mode Æ page 22.
Select and confirm the option shown.
+ or - Keep pressing the key until the desired contrast is set.
i Save.
Adjusting displays on the
Open Stage Key Module
You can adjust the contrast setting for any OpenStage
Key Module connected to suit the current light condi-
tions (eight settings available).
+ or - Press one of the keys shown in idle mode Æ page 22.
Select and confirm the option shown.
+ or - Keep pressing the key until the desired contrast is set.
i Save.
Display contrast
Key label contrast