Siemens HiPath 500 - Personal Directory Management

Step by Step
Special functions in the LAN (not for HiPath 500)
122
Opening a door
If this feature is configured (contact your service per-
sonnel), you can also activate the door opener in other
HiPath 3000 communications platforms Æ page 48.
c Open the idle menu Æ page 23.
Select and confirm the option shown.
j Enter the (DISA) station number of the HiPath 3000,
where you wish to control the relay.
i or ( Confirm your entry.
j Enter the (DISA) station number of the phone you wish
to use to control the relay.
i or ( Confirm your entry.
Select and confirm the option shown.
j Z Dial the entrance telephone number.
DISA intern
Open door