Siemens LOGO! 230RCL User Manual

LOGO! Manual
A5E00067781 01
58
3.6.9 Deleting a Program
To delete a program, proceed as follows:
1. Switch LOGO! to programming mode:
, and OK at the same time
>Program..
PC/Card..
Start
2. Move the ’>’ with the keys or to ’Program..’ and
press OK
>Edit Prg
Clear Prg
Set Clock
LOGO! switches to the programming
menu.
3. Move the ’>’ to ”Clear Prg”:
or
4. Accept ’Clear Prg’:
OK
Clear Prg
>No
Yes
To prevent you from inadvertently delet-
ing the program, we have included an
additional query.
If you do not want to delete the program, leave the ’>’ on
’No’ and press OK.
If you are sure that you want to delete the program stored
in LOGO!, proceed as follows:
5. Move the ’>’ to Yes:
or
6. Press OK. LOGO! deletes the program.
Pro
g
rammin
g
LOGO!

Siemens LOGO! 230RCL Specifications

General

Power Supply	230V AC
Input Voltage	230V AC
Digital Inputs	8
Analog Inputs	2
Programming Software	LOGO! Soft Comfort
Protection class	IP20
Mounting type	DIN rail
Digital Outputs	4
Operating Temperature	0°C to +55°C
Storage Temperature	-25°C to 70°C