LOGO!Power
Operating Instructions, 06.2014, C98130-A7560-A999-3-7629
19
Mounting position, mounting clearances
Standard mounting position
The device is mounted on standard mounting rails according to EN 60715 35x7,5/15. The
device must be mounted vertically in such a way that the input terminals and the output
terminals are at the top to ensure correct cooling.
A clearance of at least 20 mm should be maintained above and below the device.
No space is required at the side.
Figure 4-1 Output current in the standard mounting position
Figure 4-2 Mounting height derating
For details, see Section Ambient conditions (Page 45)
To Next Page
Loading...
