Siemens LOGO!Power Series - Safety, approvals, EMC; Safety and galvanic isolation

LOGO!Power
Operating Instructions, 06.2014, C98130-A7560-A999-3-7629
41
Safety, approvals, EMC
7
7.1
Safety
6EP1311-1SH03 (5 V / 3 A)
6EP1311-1SH13 (5 V / 6.3 A)
6EP1321-1SH03 (12 V / 1.9 A)
6EP1322-1SH03 (12 V / 4.5 A)
6EP1351-1SH03 (15 V / 1.9 A)
6EP1352-1SH03 (15 V / 4 A)
6EP1331-1SH03 (24 V / 1.3 A)
6EP1332-1SH43 (24 V / 2.5 A)
6EP1332-1SH52 (24 V / 4 A)
Primary/secondary galvanic isolation
Yes
Galvanic isolation
SELV output voltage Ua according to EN 60950-1 and EN 50178
Protection class
Class II (without protective conductor)
Degree of protection (EN 60529)
IP20
Test voltage
See Table 7-1 Test voltage (Page 42)