Mounting position, mounting clearances
4.2 Other mounting positions
LOGO!Power
20 Operating Instructions, 06.2014, C98130-A7560-A999-3-7629
For mounting positions that deviate from the standard mounting position, derating factors
(reduction of the output power or the permissible ambient temperature) must be observed in
accordance with the following diagrams.
Note
In the case of mounting postilions that deviate from the standard mounting position, reduced
mechanical
resistance of the devices against vibration and shock must be expected.
Particularly when installing on a vertically fastened standard mounting rail, additional
measures may be required, e.g. to prevent the device from slipping on the standard
mounting rai
l.
Figure 4-3 Mounting position (1)
Figure 4-4 Mounting position (2)
To Next Page
Loading...
