Siemens LOGO!Power Series - Description, device design, dimension drawing; Device description

LOGO!Power
Operating Instructions, 06.2014, C98130-A7560-A999-3-7629
9
Description, device design, dimension drawing
2
2.1
Device description
LOGO!Power are primary switched-mode power supplies for connection to a 1-phase AC
system or to DC systems. An electronically regulated DC voltage that can be set via a
potentiometer is available at the output of the device. The output of the device is isolated,
no-load proof and short-circuit proof. The LED display indicates the operating status.
①
Line input
②
DC output
③
Potentiometer
④
Indicator light (output voltage OK)
⑤
Lug for unlocking with a screwdriver
⑥
Natural convection
⑦
Clearance above/below
Figure 2-1 Design (example of 6EP1311-1SH13)