Siemens LOHER CHEMSTAR 1PS2 - Spare Parts Ordering and Identification; Ordering Spare Parts; Ordering Terminal Box Parts; Ordering Roller Bearings

Spare Parts
10
10.1 Ordering data
When ordering
spare parts, in addition to the precise designation of the spare part, specify the
motor type and the serial number of the motor. Ensure that the spare part designation matches
the designation in the spare part lists and add the associated part number.
Example:
Bearing shield, drive end (Part 105)
Machine type ENGV-160LB-04C
Serial numberLDX/30000001
The machine type and serial number can be found on the rating plate data and in the technical
data. The serial number is also stamped on the end face of the shaft extension at the drive
end.
Terminal box
If several terminal boxes are mounted on the machine, please also indicate the type
designation of the terminal box in addition to details of part designation and part number
according to the legend, as well as type and serial number of the motor when ordering spare
parts.
Example
● Terminal box type
● Terminal box cover (part 20.30 )
● Serial number of the motor
● Machine type
Rolling-contact bearings
When ordering roller bearings, in addition to the bearing identification code, the supplementary
specifying code is also necessary for the bearing version. Both of these codes are stamped
on the lubricant plate and specified in the motor documentation, or can also be taken from the
installed bearings.
LOHER CHEMSTAR 1PS2
Operating Instructions 08/2016 103