Assembly
5
When carrying out any work on the machine, observe the general safety instructions and the
specifications contained in EN 50110‑1 regarding safe operation of electrical equipment.
See also
Safety information (Page 13)
5.1
Conformity
Note
Loss of conformity with European directives
In
the
delivery state, the machine corresponds to the requirements of the European directives.
Unauthorized changes or modifications to the machine lead to the loss of conformity with
European directives and the loss of warranty.
5.2 Modifications to the machine
WARNING
Explosion hazard when making modifications to the machine
Substantial modifications to the machine are not permitted – or may only be performed by
the manufacturer. Otherwise an explosion can occur in an explosive atmosphere. This can
result in death, serious injury or material damage.
Please contact the Service Center, if necessary.
LOHER CHEMSTAR 1PS2
Operating Instructions 08/2016 39
To Next Page
Loading...
