EasyManua.ls Logo

Siemens MAGNETOM Skyra - Page 16

Siemens MAGNETOM Skyra
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0.0
Safety instructions
A.1-4
0.0
MAGNETOM Family - Safety Information
0.0
Laser
A.1
The laser of the laser light localizer is classified as Class 2M
according to IEC 60825-1 (Class II according to US CDRH).
A.1
Video monitoring
A.1
Labeling obligation may be regulated by local laws. The opera-
tor is responsible to comply with these laws if a video system is
installed.
A.1
Combination of devices
A.1
A.1
Any application of physiological monitoring and sensing devices
to the patient is done under the exclusive direction and respon-
sibility of the system owner.
A.1
To generally test the proper operation of peripheral equipment,
a compatibility protocol is available. Manufacturers of periph-
eral equipment should use this Siemens compatibility protocol
to test the functionality of its equipment. (System Owner
Manual: Compatibility data sheet)
A.1
Installation
A.1
Ensure that the multiple socket of the computers is not placed
on the floor.
A.1
A.1
Any combination to, or modifications of the system must
comply to the requirements of IEC 60601-1:2005 (chapter
16) and must be accepted from Siemens.
WARNING: To avoid the risk of electric shock, this equipment
must only be connected to a supply mains with protective
ground.

Table of Contents

Related product manuals