Siemens MOBILETT Plus HP - Required Documents; Required Tools, Measurement and Auxiliary Devices

MOBILETT Plus HP SPR8-220.033.03 Page 2 of 8 Siemens-Elema AB
Rev. 02 10.02 SPS-UD Solna, Sweden
1 - 2 General
Checks marked with this symbol are to be entered into the test certificate at the end of
these instructions.
Required documents 1
Required tools, measurement and auxiliary devices 1
• Standard service equipment*
• Digital multimeter
• kV measurement device (works with the filter comparison method)
• Protective ground/earth meter
• Equivalent leakage current meter
• Storage oscilloscope with ± 2.5 % accuracy
• Dose meter
• Instructions for Use SPR8-220.201...
• Service Instructions SPR8-220.061...
• Installation Instruction
Remote exposure switch system-optional
SPR8-220.031.02...
• Maintenance Instructions including DHHS... SPR8-220.101...
All tools, measurement and auxiliary devices with the exception
of those marked " * " , are listed along with their specifications in
the STC (Service Tools Catalogue).
U
S
A
NOTE
U
S
A
U
S
A