20 General Information on Troubleshooting
MOBILETT XP SPR8-230.840.01.05.02 Siemens AG
11.05 CS SD 24
Page 20 of 72
Medical Solutions
Product-specific safety measures 0
Prior to beginning system work, be aware:
DANGER
Danger of life-threatening electric shocks.
When performing maintenance or service work on the MOBILETT
XP/Eco/Hybrid/Digital with the covers removed, it is possible to
come into contact with components under voltage.
Carelessness can result in death or serious bodily injury.
¹ Before starting work with open covers, secure the work-
ing area so that no other persons can come into contact
with the system.
¹ Remove safety covers only if absolutely necessary to
perform a task. Then refit the cover correctly.
¹ Never leave the system unattended without safety cov-
ers. Do not employ any helpers without technical instruc-
tion. THINK CAREFULLY BEFORE TOUCHING ANY
PART OF THE SYSTEM!
¹ When performing measurements and troubleshooting
under voltage, comply with the general safety regula-
tions for such work.
¹ Use the discharge resistor to safely discharge non-dis-
charged capacitors.
¹ Secure the system via the brake.
To Next Page
Loading...
