Siemens NXAIR M - Page 148

Operating the shutters
148 NXAIR M 139-2021.9 / 07
Operate the slip-on lever outside the panel using the handle: Push the handle downwards as
far as it will go. The slip-on lever latches tight and the shutter opens.
Fig. 255: Pushing on the slip-on lever
Fig. 256: Pushing the handle
downwards to end position
Fig. 257: Shutter to the connection compartment open

The shutter to the connection compartment is closed.
HINT
Final procedure
Immediately proceed to perform a voltage test with recommended suitable
equipment or other intended operations.