Step by step
Miscellaneous functions
108
Entrance telephone – door opener
1
This feature lets the system allow certain pre-pro-
grammed extensions to order a door to open using an
entrance telephone device equipped with door opening
control.
Required: The entrance telephone extension has per-
mission to open the door.
A call is received from the entrance telephone
^ Lift the handset.
or
n Press this key. The LED comes on
or
T Press the flashing "OPEN DOOR" key once to answer.
Confirm.
or
N Press this key.
Select and confirm.
or
*61 Enter the code to open the door.
or
R Press the illuminated "OPEN DOOR" key a second time
to open.
The extension is in sleep mode and calls the en-
trance telephone
In this case the entrance telephone will receive a call
signal.
^ Lift the handset.
or
[1] Extensions authorized to open doors are configured during system
programming (see entrance telephone in the Programming manu-
al).
An urgent call warning tone is played when the extension config-
ured to answer the entrance telephone is busy.
Open Door?
*61=Open Door?
To Next Page
Loading...
Need help?
General