Step by step
Functions used when making calls
40
Handsfree answerback
1
The called extension receives an Alert tone. The call us-
ing the speakerphone is established immediately after
this tone is received.
Required: The destination number has a system tele-
phone with a speakerphone.
Select and confirm.
or
or
*96
or #96 Enter the code to activate or deactivate answering.
LCR
2
The LCR (Least Cost Routing) is designed to lower tele-
phone communications costs. When LCR is activated,
all outgoing calls are routed to provide the least expen-
sive connection costs. A table is created listing all times
of the day, days of the week, telephone service provid-
ers (rules) so that calls can be made when rates are at
their lowest. After programming, you can make calls
with no need to enter the carrier code since LCR auto-
matically uses the carrier that provides the lowest rate
at the time the call is being placed.
Required: This feature must be configured for the sys-
tem by using the HiPath 1100 Manager.
^ Lift the handset.
or
n Press this key. The LED comes on.
j Enter the code to access an external line (e.g, 0).
w Wait for an external line dial tone.
j Enter the external number you want to call.
[1] This feature must be activated by the destination number during
programming (see Programming an extension - auto-answering
mode, in the Programming manual).
Handsfree answerback ON?
Handsfree answerback OFF?
[2] Settings must be configured on the HiPath 1100 Manager.
To Next Page
Loading...
Need help?
General