Siemens OpenStage 15 T User Manual

Functions used when making calls
45
Step by step
View timeout
This allows you to view the time elapsed and the time
remaining for making external calls.
Required: This feature must have been configured and
activated for the extension.
N Press this key.
Select and confirm.
or
#65 Enter the code for "view timeout".
or
S Press the "TIMEOUT" key.
Shows the time elapsed for 5 seconds.
Shows the time remaining for 5 seconds.
The system shows the date and hour again.
DISA
1
DISA (Direct Inward System Access) is a feature that al-
lows you to make an external call from an external tele-
phone (as if it were an extension) through your system.
In addition, the following features can be activated or
deactivated:
• ”Internal” Æ page 65
• ”Feature deactivation” Æ page 103
• ”Conference” Æ page 51
#65 = Show time?
HH:MM:SS
HH:MM:SS
06:30 SEC 03.OUT 05
27 HiPath 1100
[1] The HiPath 1100 allows only one DISA call at a time. When there
is a DISA call in progress, a second call to a DISA external line or
one with a DISA answering mode is treated as a regular call.
The DISA line is available for another call as soon as the phone is
placed back on the hook. When there is a DISA call in progress, a
second call to a DISA external line or one with a DISA answering
mode is treated as a regular call.
If a call is received over an external line configured as a Fax/DID and
DISA, the call is answered by the Fax/DID if this facility is available.
You can program an external analog DISA line to be activated for
certain time periods (see External DISA Line, in the programming
manual).
TAPI only monitors physical ports. To operate correctly, a DISA fea-
ture must use special ports, and those cannot be monitored. If a
physical port is used when the DISA feature is activated, the TAPI
will be able to monitor it.

Siemens OpenStage 15 T Specifications

General

Brand	Siemens
Model	OpenStage 15 T
Category	Telephone
Language	English