Step by step
Functions used when making calls
20
Functions used when making
calls
Making calls
Considerations
• When authorized, it allows you to call external num-
bers
1
on a public network.
• The HiPath 1100 can also be programmed to require
pressing the "Internal" key before an internal number
can be dialed. When this is the case, there is no
need to enter an external line access code to dial an
external number ("Automatic Seizure of an exter-
nal line
2
). Check with your system’s support techni-
cian.
• Ask your support technician for the required internal
numbers, public network access codes as well as
information about activated features and available
extensions.
• Depending on how the HiPath 1100 is programmed
(ask the system’s technical support team) it will au-
tomatically select the most economical route for
making an external call (LCR - Least Cost Routing).
When an LCR is not available, the non-default carrier
name or "EXPENSIVE CONN" appears on the dis-
play, and a warning tone is emitted.
...Using the Handset
^ Lift the handset.
j •For an internal call: Enter an extension number
(e.g., 11/101).
•For an external call: Enter the access code to ac-
cess an external line (e.g., 0) and the external num-
ber you want to call.
w [ Wait for the call to be answered. Start conversation.
[1] See the chapter on Important Programming Data - Classes of Ser-
vice in the Programming manual.
[2] It allows the user to dial an external call directly, without having to
dial an external access code (e.g 0). If a continuous dialing tone is
heard when the handset is lifted, it means that Automatic Seizure
Mode is activated (see Programming an external line - Automatic
Seizure of an external line, in the programming manual).
To Next Page
Loading...
Need help?
General