Siemens OpenStage 15 Administration Manual

administration.fm
A31003-S2000-M102-2-76A9, 28/05/2009
OpenScape Voice - OpenStage Family, Administration Manual
3-3
Administration
Access via Local Phone
OpenStage 20
Use the 3-way Navigator to navigate and execute administrative actions in the administra-
tion menu.
OpenStage 15
4. Select a parameter
If a parameter is set by choosing a value from a selective list, an arrow symbol appears in
the parameter field that has the focus. Press the key to enter the selective list. Use the Sen-
sor Wheel resp. the m and l key to scroll up and down in the selective list. To select a list
entry, press the i key.
5. Enter the parameter value
For selecting numbers and characters, you can use special keys. See the following table:
Key Function
* Switch to punctuation and special characters.
# Toggle between lowercase characters, uppercase characters, and digits in
the following order:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
Press the m key briefly:
- scroll up
Hold down:
- scroll to top of list
Press the
l key briefly:
- scroll down
Hold down:
- scroll to end of list
Press the
l key:
- confirm entries
- perform an action
Press the m key briefly:
- scroll up
Press the
l key:
In idle mode:
- Open idle menu
In lists and menues:
- scroll down
Press the
i key:
- confirm entries
- perform an action

Siemens OpenStage 15 Specifications

General

Type	IP Phone
Connectivity	Ethernet
Power over Ethernet (PoE)	Yes
Speakerphone	Yes
Keys	Fixed function keys
Headset Port	Yes
Protocols	SIP
Display	Monochrome display
Audio	G.711, G.729
Power Supply	PoE or external power adapter