EasyManua.ls Logo

Siemens OpenStage 20 E - Fixing Problems; Telephone Care and Troubleshooting; Contacting Support Personnel

Siemens OpenStage 20 E
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fixing problems
105
Fixing problems
Caring for your telephone
Never allow the telephone to come into contact with coloring, oily or
aggressive agents.
Always use a damp or antistatic cloth to clean the telephone. Never
use a dry cloth.
If the telephone is very dirty, clean it with a diluted neutral cleaner con-
taining surfactants, such as a dish detergent. Afterwards remove all
traces of the cleaner with a damp cloth (using water only).
Never use cleaning fluids containing alcohol or plastic-damaging deter-
gents to clean the telephone. The use of scouring agents is also forbid-
den.
Troubleshooting
Pressed key does not respond:
Check if the key is stuck.
Telephone does not ring:
Check whether the "Do not disturb" function is activated on your telephone
(Æ page 64). If so, deactivate it.
You cannot dial an external number:
Check whether your telephone is locked ("Phone locked: Enter Password"
appears on the screen). If the phone is locked, enter your PIN to unlock it.
To correct any other problems:
First contact the relevant service personnel. If the administrator are unable
to correct the problem, contact Customer Service.
Contact partner in the case of problems
Contact your administrator if a fault persists for more than five minutes, for
example.

Table of Contents

Other manuals for Siemens OpenStage 20 E

Related product manuals