Siemens OpenStage 20 E - Call Forwarding Dont Answer

Step by Step
HiPath 8000 functions
76
Deactivating
^ Lift the handset.
j Enter the access code (see access code table
Æ page 87) to deactivate call forwarding.
Z You hear a confirmation tone.
Call forwarding don’t answer
With Call forwarding don’t answer (CFDA), you can
use a feature code to activate call forwarding to another
number if the handset is not picked up after a certain
number of eight rings.
You can use the feature code to activate/deactivate this
function and define a forwarding destination.
Activating
^ Lift the handset.
j Enter the access code (see access code table
Æ page 87).
or if you also want to set the forwarding destination
j enter the code with a phone number such as
*901234567 to activate call forwarding.
Z You hear a confirmation tone.
Deactivating
^ Lift the handset.
j Enter the access code (see access code table
Æ page 87) to deactivate call forwarding.
Z You hear a confirmation tone.
Your administrator may also have configured a
permanent forwarding destination so that calls
are automatically forwarded to this fixed phone
number as soon as you activate CFDA forward-
ing.