Siemens OpenStage 20 E - Making and Redialing Calls

Basic functions
27
Step by Step
Making calls
If you are using a dial plan and "Sofortwahl" is set
Æ page 56, dialing is automatically performed as soon
as the character string entered matches an entry in the
dial plan.
Off-hook dialing
^ Lift the handset.
j Enter the station number.
or
Confirm. ## represents the last number dialed.
Dialing in speakerphone mode
j Enter the station number. Use the navigator Æ page 14
to correct entries as necessary.
n The speaker key lights up (OpenStage 20/20 G only).
The party you are calling answers via loudspeaker. You
can also use speakerphone mode.
En-bloc dialing
j Enter the station number. Use the navigator Æ page 14
to correct entries as necessary.
^ Lift the handset.
or
n Press the key shown (OpenStage 20/20 G only).
or
Confirm.
or Wait until the autodial delay expires Æ page 55.
If you selected the option "Busy When Dialing"
Æ page 57, you will not be interrupted by an in-
coming call. In this case, the caller hears the busy
signal.
Redial {1} ##? l
Dial? l