Siemens OpenStage 20 E - Page 44

Step by Step
Enhanced phone functions
44
Activating/deactivating the hold reminder tone
z
You can also configure this setting via the Web interface
Æ page 101.
N Press the key shown.
Select and confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown and confirm twice.
Setting the hold reminder time
Use the "Hold reminder" function to set the time after
which you want to receive an automatic reminder about
a held call. The lowest time value is 1, i. e. the reminder
will alert after 1 minute. The maximum value is 99 mi-
nutes. With 0, you can deactivate the reminder.
z
You can also configure this setting via the Web interface
Æ page 101.
N Press the key shown.
Select and confirm the option shown.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
User
Configuration
Connected calls?
Allow hold rem. = No f
Yes l
Option = Save & Exit l
User
Configuration
Connected calls?
Hold rem. delay=3 f