Siemens OpenStage 20 G Administration Manual

administration.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
3-81
Administration
Speech
3.10 Speech
3.10.1 RTP Base Port
The port used for RTP is negotiated during the establishment of a connection. The RTP base
port number defines the starting point from which the phone will count up when negotiating.
The default value is 5010.
The number of the port used for RTCP will be the RTP port number increased by 1.
Administration via WBM
Network > Port Configuration
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- Port Configuration
|
--- Number
|
--- RTP base

Siemens OpenStage 20 G Specifications

General

Brand	Siemens
Model	OpenStage 20 G
Category	IP Phone
Language	English