inbetriebnahme.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
2-1
Startup
Prerequisites
2Startup
2.1 Prerequisites
The advance acts as an endpoint client on an IP telephony network, and has the following net-
work requirements:
• An Ethernet connection to a LAN
• A HiPath Communications System: HiPath 3000, HiPath 4000, OpenScape Office or
OpenScape Business.
• Usage of Voice VLANs is recommended.
• An FTP Server for file transfer, e. g. firmware, configuration data, application software
• A Dynamic Host Configuration Protocol (DHCP) server (recommended).
See also: http://wiki.siemens-enterprise.com/wiki/IEEE_802.1x.
7
Only use switches in the LAN to which the OpenStage phone is connected. An
operation at hubs can cause serious malfunctions in the hub and in the whole
network.
To Next Page
Loading...
Need help?
General