Siemens OpenStage 20 G Administration Manual

Administration
A31003-S2010-M100-18-76A9
3-12 OpenStage HFA Family, Administration Manual
administration.fm
LAN Settings
3.2.2.3 Manual configuration of a VLAN ID
To configure layer 2 VLAN manually, first make sure that VLAN discovery is set to "Manual" (see
section 3.2.2.1, “Automatic VLAN discovery using DHCP”). Then, the phone must be provided
with a VLAN ID between 1 and 4095. If you misconfigure a phone to an incorrect VLAN, the
phone will possibly not connect to the network. In DHCP mode it will behave as though the
DHCP server cannot be found, in fixed IP mode no server connections will be possible.
Administration via WBM
Network > IP configuration
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- IP Configuration
|
--- VLAN ID

Siemens OpenStage 20 G Specifications

General

Brand	Siemens
Model	OpenStage 20 G
Category	IP Phone
Language	English