Troubleshooting
236
No memory after a Software Update
In some cases "No memory" is displayed after an application download
! page 138.
• Restart the phone ! page 144 to free up memory.
• Perform the software update again.
If "No memory" is still displayed:
• Save the current configuration ! page 75.
• Restore the factory settings ! page 97.
• Re-enter the minimal set of IP ! page 48 and FTP ! page 74 parame-
ters.
• Perform the software update again.
• Restore the saved configuration ! page 75.
To Next Page
Loading...
