Siemens optiPoint 410 S Series - Configure System Information; Terminal Details

Extended Administration
60
Configure System Information
To be granted access to a SIP Server some terminal and SIP related infor-
mation have to be configured.
Terminal Details
First of this the SIP server has to be configured.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Te rm i na l
Number
! page 222
- 02=System
- 01=Terminal Number
(change terminal number)
- SIP environment
- Phone number
(enter terminal number)
Te r m i n a l N a m e
! page 222
- 02=System
- 02=Terminal Name
(change terminal name)
- SIP environment
- Phone name
(enter terminal name)
Register by
Name
! page 210
- 02=System
- 03=Register by Name
(switch on/off)
- SIP environment
- Register by name
(activate/deactivate checkbox)
User Display ID
! page 182
- 02=System
- 44=Display ID
- 1=New/Change ID
(enter display name)
- SIP environment
- Display ID
(enter display name)
Use Display ID
! page 182
- 02=System
- 44=Display ID
- 2=Use Terminal ID
- 3=Use Display ID
(enable/disable)
- SIP environment
- Use Display ID
(enable/disable)