Siemens optiPoint 410 S Series - DSS Key Configuration

Extended Administration
71
DSS key configuration
Each DSS key will be configured similarly to a Keyset line key and will re-
quire the following to be specified for the line:
• SIP URI of the primary line at the DSS target
• SIP Realm
• SIP User ID
• SIP Password
The remaining line configuration items will be forced to specific values for
a DSS key line
In addition a DSS key being configured will set the phone to not use the
optiPoint display module by default, and a DSS key will not appear as a line
key on the optiPoint display module.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
DSS
! Seite 196
Y
(read only if configured) - Funcktion keys
- Phone
or
- Key module
- Select a key with EDIT
a configuration dialog appears
- Select:DSS
(A key with DSS is ready for con-
figuring)
DSS Address of
Record
! page 184
Y
(read only if configured) DSS key configuration dialog
- Address of record
(enter e.g. phone number)
DSS Realm
! page 184
Y
(read only if configured) DSS key configuration dialog
- Realm
(enter IP address)
DSS User ID
! page 185
Y
(read only if configured) DSS key configuration dialog
- User ID
(enter ID)
DSS Password
! page 185
Y
(read only if configured) DSS key configuration dialog
- Password
(enter SIP-password )