Siemens optiPoint 410 S Series - Feature Access

Extended Administration
72
Feature Access
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Feature Access
! page 185
- 02=System
- 37=Feature Access
Select one of the options for
to enable oder disable
- 01=Call Hold Explicit
- 02=Call Deflection
- 03=Call Forwarding
- 04=Log Forwarded Calls
- 05=Call Duration
- 06=Call Waiting
- 07=Call Transfer
- 08=Call Join
- 09=Call Display Name
- 10=Call Display Number
- 11=Music On Hold
- 12=Do Not Disturb
- 13=Message Waiting
- 14=Local Conference
- 15=Auto Answer CTI
- 16=Auto Reconnect CTI
- 17=Call Park
- 18=Call Park Pickup
- 19=Wap Browser On DSM
- 20=Address Book
- 21=DSM Call Control
- 22=Voice Recognition
- 23=Speed Dial On DSM
- 24=Contacts
- 25=Hot Keypad Dialing
- 26=Callback-busy
- 27=Callback-no reply
1
- 28=Call recording
- 29= GPU New Call Beep
1 For future use – not supported with HiPath 8000
- Feature Access
(mark as enabled)
Auto answer - CTI
Auto reconnect - CTI
2
Call deflect
1
Call display by name
1
Call display by numbe
1
r
Call duration
1
Call forwarding
1
Call hold (explicit)
1
Call join
1
Call park
1
Call recording
Call pickup
1
Call transfer
1
Call waiting
1
Do not disturb
DSM - ENB
3
DSM - LDAP
3
DSM - Speed dial
3
DSM - Telephony use
3
DSM - Voice recognition
3
DSM - WAP browser
3
GPU New Call Beep
Local conference
4
Log forwarded calls
1
Message waiting
Music on hold
Hot keypad dialing
Callback - busy
Callback - no reply
2 Not used with optiPoint 410 entry
3 Not used with optiPoint 410/420 economy economy plus and optiPoint 410 entry
4 Not used with optiPoint 410/420 economy and optiPoint 410 entry