Siemens optiPoint 410 S Series - Dial Plan Configuration and Status

Extended Administration
69
Dial Plan Configuration and Status
Terminating line
preference
! page 223
- 02=System
- 28=Keyset
- 06=Term line pref
(select line preference)
- Multiline operation
- Terminating line preference
(select line preference)
Line action
mode
! page 197
- 02=System
- 28=Keyset
- 07=Line action mode
(select line action mode)
- Multiline operation
- Line key operation mode
(select operation mode)
Show focus
! page 213
- 02=System
- 28=Keyset
- 09=Show focus
(switch on or off)
- Multiline operation
- Show focus
(mark to enable)
Forwarding
Indication
! page 186
- 02=System
- 28=Keyset
- 10=Forwarding Ind
(switch on or off)
- Multiline operation
- Use LED to indicate Remote
Forwarding
(mark to enable)
Reservation
Timer
! page 211
- 02=System
- 28=Keyset
- 11=Reservation Timer
(set time)
- Multiline operation
- Reservation timer
(set time)
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Dial Plan
! page 176
- 02=System
- 29=Dial Plan
(enable/disable)
- System
- Dial Plan
- Action
(enable/disable)
Dial Plan Info
! page 176
- 07=General info
- 4=Dial Plan
- 1=ID
- 2=Stauts
- General information
- Dial plan
- Name and Status
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)