EasyManua.ls Logo

Siemens optiPoint 410 S Series - Survivability

Siemens optiPoint 410 S Series
247 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Extended Administration
99
Survivability
The survivability feature will allow the SIP User Agent to register with a
backup SIP Proxy which will be used to make and receive calls when the
primary SIP Proxy fails or is not reachable due to a network failure.
The prime reason for this feature is to maintain basic call functionality
when network failures occur and it is therefore expected that some fea-
tures and functionality will not be available when working in a survivability
mode.
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Backup Address
! page 219
-16=Survivability
- 1=Backup address
(change IP address
1
)
1 or host name (if DNS is applicable ! page 41)
- Survivability
- Backup IP address or DNS
name
(enter IP address
1
)
Backup Port
! page 219
-16=Survivability
- 2=Backup port
(change port address )
- Survivability
- Port
(enter port address)
Backup
Registration
! page 220
- 16=Survivability
- 3=Backup registration
(switch on/off)
- Survivability
- Backup Registration
(mark to enable)
Backup Reg
Timer
! page 220
- 16=Survivability
- 4=Backup reg timer
(enter time)
- SIP environment
- Backup Registration timer value
(enter time)
Backup OBP
! page 220
- 16=Survivability
- 5=Backup OBP
(switch on/off)
- Survivability
- Backup Outbound proxy
(mark to enable)
Backup
Tr a n s p o r t
! page 220
- 16=Survivability
- 6=Backup transport
(TCP or UDP; UDP is pre-
pared)
- Survivability
- Backup SIP transport
(TCP or UDP;UDP is prepared)

Table of Contents

Other manuals for Siemens optiPoint 410 S Series

Related product manuals