Siemens optiPoint 410 S Series - View SNMP Errors; Change Speech Parameters

Extended Administration
92
View SNMP Errors
Change Speech Parameters
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
MIB2 Discards
! page 182
>
- 10=MIB2-Discards
- SNMP
- SNMP MIB2 errors
MIB2 Err Count
! page 191
>
- 11=MIB2 err count
- SNMP
- SNMP MIB2 errors
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Audio Mode
! page 165
- 06=Speech
- 2=Audio mode
(select audio mode)
- Speech
- Audio mode
(select audio mode)
Compression
Encoding
! page 169
- 06=Speech
- 3=Compression
(select compression)
- Speech
- Compression encoding
(select compression)
G.711 Silence
! page 188
- 06=Speech
- 4=G711 Silence
(switch on/off)
- Speech
- G.711 Silence Suppression
(activate/deactivate checkbox)
RTP Packet Size
! page 212
- 06=Speech
- 5=RTP Packet Size
(select packet size)
- Speech
- G.711 RTP packet size
(select packet size)
Microphone
! page 203
- 06=Speech
- 6=Mictrophone
- 1=Normal
-2=Disabled
(select option)
- Speech
- Microphone Disable
(Mark as disabled or not)