Siemens OptiPoint 410 - Settings; Configuration; Country Options

Description of functions Alphabetical Reference
67
Audio Loop Test
• The test activates the microphone and the loudspeaker in the handset.
• You can check these components by speaking and listening.
Æ page 41
Audio Mode
•“Codec“ Æ page 67
Autodiscovery Server Address
• Further description ... (entry)
Autodiscovery Server Port
• Further description ... (entry)
Clear User Data
• With this function you can delete all the entries made by the user in the
optiPoint 410.
Æ page 39 Æ page 59
Codec
• Here you can select the audio transfer principle that should be used.
• Standard value Æ page 95.
Æ page 35 Æ page 59
Compression
• Here, you can select one of the two compression processes that
should be used if the "LoBand" Æ Codec was selected: Æ G.723 or
Æ G.729.
• Standard value Æ page 95.
Æ page 36 Æ page 59
Codec Audio Mode Use of
HiQual
preferred
Uncompressed audio
transmission
Uncompressed audio transmis-
sion use (Æ G.711). Suitable for
broadband Internet connec-
tions.
LoBand
preferred
Use preferred com-
pressed audio transmis-
sion.
Suitable for connections with
different bandwidths.
LoBand
only
Use compressed audio
transmission exclusively.
Suitable for connections with
low bandwidth.