Description of functions Alphabetical Reference
71
Download Server Address
• Enter the Æ IP address of the Æ FTP server to upload and download
files from and to the optiPoint 410.
• Standard value Æ page 95.
• IP editor in optiPoint 410 Æ page 94.
Æ page 32 Æ page 58
DSM Application Filename
• Can be configured only for optiPoint 410 standard/advance, and is re-
quired only if an optiPoint 410 Display Module is used.
• Enter the name of the file containing the software of the optiPoint 410
Display Module.
• The file must exist in a defined directory on the Æ FTP server
(Æ Download Server Address, Æ FTP Path).
• Valid values: 1 ... 24 characters
• Standard name Æ page 95.
• Text editor in optiPoint 410 Æ page 93.
Æ page 34 Æ page 58
E.164 Address
• “Subscriber Number“ Æ page 80
External Directory Access Allowed
• Further description... (DSM)
External Access
• Can be configured only for the optiPoint 410 standard/advance.
• Specify the number that must be prefixed to access an external tele-
phone number , e.g., "0".
• Standard value Æ page 95.
• Number editor in optiPoint 410 Æ page 94.
Æ page 30 Æ page 57
Factory Reset
• With this function you can reset all administration parameters to the
original settings at the time of delivery.
Æ page 39 Æ page 50 Æ page 59
File Transfer Status
• Displays the status of the possibly executed upload and download op-
eration, such as for instance Æ Download Configuration.
Æ page 56
Resetting can lead to the failure of all functions of the optiPoint 410.
Ensure that you have all the information necessary for the start up
Æ page 12.
To Next Page
Loading...
