Description of functions Alphabetical Reference
79
ROM Test
• You can test the Æ ROM memory of your optiPoint 410.
• The results are displayed after the test is over.
Æ page 41 Æ page 61
Search Fields Presented
• Further description ... (DSM)
Security Time Window
• Further description ... (entry)
Silence Suppression
• With this switch you can define whether the suppression of back-
ground noise should be activated during silence (no conversation).
• Standard value Æ page 95.
Æ page 36 Æ page 59
SNMP Password
• Specify the password that was defined in the Æ SNMP server as the
password for accessing this server.
• The password should be 1 to 24 characters long.
• Standard password Æ page 95.
• Password editor in optiPoint 410 Æ page 92.
Æ page 35 Æ page 59
SNMP Trap IP Address
•If an Æ SNMP server exists in the network, enter the Æ IP address of
this server here.
• Standard address Æ page 95.
• IP editor in optiPoint 410 Æ page 94.
Æ page 35 Æ page 59
SNMP Trap Port
• Define the Æ Port here through which the Æ SNMP error messages
should be transmitted.
Æ page 54
SNTP Server IP Address
•If an Æ SNTP server exists in the network, enter the Æ IP address of
this server here.
• Standard address Æ page 95.
• IP editor in optiPoint 410 Æ page 94.
Æ page 36 Æ page 60
To Next Page
Loading...
