Alphabetical Reference Description of functions
78
National Dial Prefix
• Canonical format Æ page 83.
Æ page 31 Æ page 57
Number Field Format Information
• Further description ... (DSM)
PBX Address
• Enter the Æ IP address of the Æ PBX which operates with the
optiPoint 410.
• IP editor in optiPoint 410 Æ page 93.
Æ page 26 Æ page 56
PC Port Settings
• “LAN Port Settings“ Æ page 75
PING Test
• Conduct a Æ PING test to check whether a server or another terminal
device (e.g., the optiPoint 410) can be reached in the network.
• For this, enter an Æ IP address as the test target, the connection to
which you wish to test.
Æ page 42 Æ page 61
QoS L2/L3
• The settings relate to the Æ Layer 2 and Æ Layer 3 areas of the
Æ QoS, that regulate the prioritisation of the transferred data.
• For Layer 2, the Æ VLAN Discovery Mode and the Æ Virtual LAN ID can
be changed. For Layer 3, the Æ L2/L3 Voice/Signalling can be changed.
• The activation of Layer 2 and / or Layer 3 support is meaningful only if
the used Æ Switch can interpret this information (e.g., "Layer 2
Switch").
• Standard value Æ page 95.
Æ page 22 Æ page 59
RAM Test
• Here you can test the Æ RAM memory of your optiPoint 410.
• The results are displayed after the test is over.
Æ page 41 Æ page 61
Registration Time to Live
• Further description ... (entry)
Æ page 54
To Next Page
Loading...
