Siemens PERFECT HARMONY GENIII/E Series - Page 107

Perfect Harmony GENIII/e User’s Manual The Keypad and Display Interface
A1A19000405A: Version 1.3 3-71
s
s
ss
3
Table 3-67: Slave Parameter
Parameter ID Units Default Min Max Description
Multiple config files 9185 OFF
Enable multiple config file
operation.
Show active config file 9195 Display current active config file.
Set active config file 9196 Defaults.sfg
Set the displayed file to be the
active config file.
Setup SOP config flags 9186 Sub menu
Sub-menu for SOP flag
configuration.
Create new config file 9197
Create new config file using
numeric keypad.
Set SOPConfigFile1_O 9187 Defaults.sfg
Set name of config file #1 that
corresponds to the SOP flag #1.
Set SOPConfigFile2_O 9188 Defaults.sfg
Set name of config file #2 that
corresponds to the SOP flag #2.
Set SOPConfigFile3_O 9189 Defaults.sfg
Set name of config file #3 that
corresponds to the SOP flag #3.
Set SOPConfigFile4_O 9190 Defaults.sfg
Set name of config file #4 that
corresponds to the SOP flag #4.
Set SOPConfigFile5_O 9191 Defaults.sfg
Set name of config file #5 that
corresponds to the SOP flag #5.
Set SOPConfigFile6_O 9192 Defaults.sfg
Set name of config file #6 that
corresponds to the SOP flag #6.
Set SOPConfigFile7_O 9193 Defaults.sfg
Set name of config file #7 that
corresponds to the SOP flag #7.
Set SOPConfigFile8_O 9194 Defaults.sfg
Set name of config file #8 that
corresponds to the SOP flag #8.