The Keypad and Display Interface Perfect Harmony GENIII/e User’s Manual
3-58 A1A19000405A: Version 1.3
3
Table 3-54: Pick List Variables for Historic Log (all units are %)
3.3.7 Protect Menu (7) Options
The Drive Protect Menu (7) consists of the following menu options:
• Input Protect Menu (7000)
• Single Phasing Menu (7010)
These menus are explained in tables that follow.
Abbreviation Description
Mtr Spd Motor speed
Spd Ref Speed reference
Spd Dmd Raw Speed Demand
Trq I Cmd Torque Current Command
Trq I Fdbk Torque Current Feedback
Mag I Cmd Magnetizing Current Command
Mag I Fdbk Magnetizing Current Feedback
I Total Out Total Motor Current
Mtr Volt Motor Voltage
Mtr Flux Motor Flux
V Avail Line Voltage Available
V Avail RMS Line Voltage RMS
Pwr Out Output Power
V Neutral Output Neutral Volts
I Total In Total Input Current
Pwr In Input Power
Freq In Input Frequency
*
Note: See Appendix D for Historical Log Fault word decoder.
To Next Page
Loading...
