Siemens PERFECT HARMONY GENIII/E Series - Auto Menu (4) Options

The Keypad and Display Interface Perfect Harmony GENIII/e User’s Manual
3-42 A1A19000405A: Version 1.3
s
s
ss
3
Table 3-31: Control Loop Test Menu (3460)
3.3.4 Auto Menu (4) Options
The Auto Menu (4) consists of the following menu options:
• Speed Profile Menu (4000)
• Analog Input Menu (4090)
• Analog Outputs Menu (4660)
• Speed Setpoint Menu (4240)
• PID Select Menu (4350)
• Comparator Setup Menu (4800)
These menus are explained in the tables that follow.
Parameter ID Units Default Min Max Description
Test type 3470 Speed
This pick list selects the type of
loop test desired (speed or torque).
• Speed
•Torque
Test positive 3480 % 30.0 -200.0 200.0
Positive going limit of the test
waveform.
Test negative 3490 % -30.0 -200.0 200.0
Negative going limit of the test
waveform.
Test time 3500 sec 30.1 0.0 500.0
Sets the time for the drive to spend
in either the positive or negative test
setting.
Begin test 3510 Function
This function starts the speed or
torque loop test.
Stop test 3520 Function
This function stops the speed or
torque loop test.