Siemens PERFECT HARMONY GENIII/E Series - Log Control Menu (6) Options

The Keypad and Display Interface Perfect Harmony GENIII/e User’s Manual
3-56 A1A19000405A: Version 1.3
s
s
ss
3
Table 3-50: Default Security Access Levels and Access Codes
Note that menu options above security level 5 are more technical in nature and are typically used by Siemens
personnel during commissioning or servicing.
The Security Edit Menu (5000) can be accessed to change the factory default security settings. When the Perfect
Harmony is configured for security level 7 access, the Security Edit Menu (5000) is visible from the Main Menu (5).
Functions within this menu are used to set the security levels for menu items, to “hide” menu items, and to prevent
changes to specific parameters. The Security Edit Functions Menu (5000) contains security functions described in
Table
3-50.
3.3.6 Log Control Menu (6) Options
The Log Control Menu (6) consists of the following menu options:
• Event Log Menu (6180)
• Alarm/Fault Log Menu (6210)
• Historic Log Menu (6250)
The contents of these menus are explained in the tables that follow.
Table 3-51: Event Log Menu (6180)
The event log is stored in a file on the CompactFLASH. The maximum file size is 65 kBytes. The file is overwritten
once the maximum size is reached.
Table 3-52: Alarm/Fault Log Menu (6210)
Access Level Default Access Code Level of Security
0 None Minimum Access
5 5555 Startup Access for Service and/or Startup
7 7777 Advanced Access for Troubleshooting
8 Proprietary Factory Use Only
Parameter ID Units Default Min Max Description
Upload event log 6190 Function
Upload the event log via the Ethernet
or the RS232 serial port.
Clear event log 6200 Function Used to clear the event log.
Parameter ID Units Default Min Max Description
Alarm/Fault log
display
6220 Function Used to display the fault log.
Alarm/Fault log
upload
6230 Function Upload the fault log via the RS232 serial port.
Alarm/Fault log
clear
6240 Function Used to clear the fault log.