Siemens PERFECT HARMONY GENIII/E Series - Page 57

Perfect Harmony GENIII/e User’s Manual The Keypad and Display Interface
A1A19000405A: Version 1.3 3-21
s
s
ss
3
Logs Menu 6
Event Log 6180 Table 3-51 3-57
Used to configure
and inspect the
event, alarm/fault,
and historic logs of
the VFD.
Alarm/Fault Log 6210 Table 3-52 3-57
Historic Log 6250 Table 3-53 3-58
Drive Protect Menu 7 Input Protection 7000 Table 3-56 3-61
Adjusts setpoint
limits for critical
VFD variables.
Meter Menu 8
Display Parameters 8000 Table 3-59 3-62
Set up Variables for
display to LCD.
Hour Meter Setup 8010 Table 3-61 3-66
Input Harmonics 8140 Table 3-62 3-66
Fault display override 8200 Table 3-58 3-62
Communications
Menu
9
Serial Port Setup 9010 Table 3-64 3-68
Used for
configuring the
various
Communications
features of the VFD.
Network Control 9943
Please refer to
Communica
-
tions manual
(number
A1A902399)
2-28
Network 1 Configure 9900 4-27
Network 2 Configure 9914 8-19
Display Network
Monitor
9950 Table 3-63 3-67
Serial echo back test 9180
Please refer to
Communica
-
tions manual
(number
A1A902399)
N/A
Sop and serial
functions
9110 Table 3-65 3-69
TCP/IP Setup 9300 Table 3-66 3-70
Menu ID Submenu Names ID Table Page Description