Siemens PERFECT HARMONY GENIII/E Series - Page 98

The Keypad and Display Interface Perfect Harmony GENIII/e User’s Manual
3-62 A1A19000405A: Version 1.3
s
s
ss
3
Table 3-59: Display Parameters Menu (8000)
This menu contains the pick lists to select the variables to be displayed on the front panel default display.
Figure 3-24: Dynamic Programmable Meter Display
Parameter ID Default Description
Status variable 1 8001 DEMD
Select variable 1 to be displayed on the LCD
display. Pick List – See Table 3-60.
Status variable 2 8002 %SPD
Select variable 2 to be displayed on the LCD
display. Pick List - See Table 3-60.
Status variable 3 8003 VLTS
Select variable 3 to be displayed on the LCD
display. Pick List - See Table 3-60.
Status variable 4 8004 RPM
Select variable 4 to be displayed on the LCD
display. Pick List - See Table 3-60.
*
Note: Table 3-60 contains name, abbreviation, display and variable columns of standard pick list variables
(used in the Historic Log Menu, the Display Variable Menu, etc.). The name column contains the name
of the display variable. This is what is displayed as the user scrolls through the list of available display
variables. The abbreviation column contains an abbreviation that is displayed after a variable is
selected from the list. The display column contains an even more abbreviated form of the variable
name. This final abbreviation (between 2 and 5 characters in length) is what the Perfect Harmony
displays on the front panel of the drive. The variable column shows the associated system program
variable for reference.
MODE DEMD RPM MVLT OAMP
OFF 80 0 0 0
Top row of display shows
field names
Bottom row of display
shows dynamic values
Fixed display field
User-defined Display
Variable #1
User-defined Display
Variable #2
User-defined Display
Variable #3
User-defined Display
Variable #4
User-defined display fields