General Technical Specifications
6.2 Standards and Approvals
ET 200S Distributed I/O System - Fail-Safe Modules
52 Installation and Operating Manual, 08/2008, A5E00103686-07
Shipbuilding approval
Submitted to the following classification bodies
(exception: PM-D F DC24V PROFIsafe to GL (German Lloyd) only):
ABS (American Bureau of Shipping)
BV (Bureau Veritas)
DNV (Det Norske Veritas)
GL (Germanischer Lloyd)
LRS (Lloyds Register of Shipping)
Class NK (Nippon Kaiji Kyokai)
Use in Industry
SIMATIC products are designed for use in industrial environments.
Requirement Relating to Field of Application
Emitted Interference Immunity to Interference
Industry EN 61000-6-4 EN 61000-6-2
Use in Residential Areas
ET 200S applications in residential areas must be compliant with limit class B to EN 61000-
6-4 for emission of radio interference.
Suitable measures for achieving limit class B for emission of radio interference are:
● Installing the ET 200S in grounded control cabinets/control boxes
● Use of filters in power supply lines
TÜV Certificate and Standards
The fail-safe modules are certified in accordance with standards and guidelines in terms of
functional safety. Refer to the report on the safety certificate (TÜV certificate) and the
associated annex for more details in this regard. The current TÜV documents can be found
on the Internet (
http://support.automation.siemens.com/WW/view/en/12461959/133300).
Requesting TÜV Certificates
You can request copies of the TÜV certificate and the accompanying report from the
following address:
Siemens Aktiengesellschaft
Industry Sector
IA AS RD ST
P.O. Box 1963
D-92209 Amberg
See also
Safety engineering in SIMATIC S7
(
http://support.automation.siemens.com/WW/view/en/12490443)
To Next Page
Loading...
